Website design for hotels

Hotel guest Wi-Fi: access, security and speed How guests get on, what you collect, what you promise.

Guests rarely praise good Wi-Fi, but they always mention bad Wi-Fi. For a small hotel the questions are practical: how guests get on, whether to ask for an email, how to keep guests away from the card terminal, how to reach the far room through thick walls, and what to say on the website. This guide covers each one.

free, by email, no calls, no obligation
Access

Five ways to let guests on the network

Every option trades ease against control. This is our judgement of how they compare for a small hotel, not survey data.

Access methodEase for guestsSecurityMarketing valueFits
Open network, no passwordEasiest; join and goLow. Traffic is unencrypted unless the network supports Wi-Fi Enhanced Open; anyone nearby can joinNoneRarely a good idea; at most a lobby or terrace network, kept apart
One shared password (WPA2 or WPA3)Easy if the password is on the key card or a QR codeGood for most small hotels if the password is changed regularlyNoneSmall hotels, inns and B&Bs with a simple setup
Password per room or per stayEasy if it arrives with the key or in the pre-arrival messageBetter; codes expire when the guest leavesNone directlyHotels with a system that creates codes, or a PMS that links to one
Captive portal: room number and surname, or a codeOne extra step; some devices drop the login and ask againGood; access ends at check-outLowLarger small hotels, hotels with public areas or a restaurant
Captive portal with email or social loginMost friction; guests type details before they can use the InternetSimilar to other portalsHighest, but only with valid consent (see below)Hotels with a real email program and someone to run it

A login page is called a captive portal: the web page that appears before the Internet works. Many portal systems can also run in the background with a shared password, so you can start simple and add it later.

Security

Passwords, encryption and a separate network

Use WPA2 or, better, WPA3. These are the security standards of the Wi-Fi Alliance. WPA3, launched in 2018, protects better against people trying to guess the password, and the Wi-Fi Alliance now makes it mandatory for its certified devices. Older phones and laptops may only speak WPA2, so most hotel equipment can run both at once, often called transition mode. Ask your installer to set it up that way.

An open network is not private. Without a password, traffic between the device and the access point is not encrypted. Wi-Fi Enhanced Open, also from the Wi-Fi Alliance, encrypts open networks without a password and protects against passive eavesdropping, but it does not prove the network is yours, and older devices fall back to no encryption.

Keep guests away from your own systems. The guest network should be separate from the network for staff computers, the PMS, cameras, door locks and card terminals. In practice this is a separate network name and a separate segment set up by your installer, plus a setting usually called client isolation, which stops one guest's device from seeing another's. The card standard, PCI DSS, does not require segmentation, but its council notes that good segmentation can reduce the part of your business that must be assessed. Ask your payment provider or IT person what applies to you. Our guide to hotel security covers the rest of the building.

Treat the password as semi-public. Change it on a schedule, for example each season. Never publish it on the open web: in a review reply, a social post or a page of your site. Our list of what not to put on a hotel website explains why.

A note from the studio: we build hotel website design for inns and independent hotels. If your site is more than a few years old, start with signs your hotel website is outdated.

Consent

Login pages, marketing emails and the rules

A captive portal that asks for an email address is a data collection tool. This is general information, not legal advice. Rules vary by country and state, so check locally.

  • In the EU, consent must be freely givenUnder the GDPR, consent only counts if the person has a real choice and can refuse without a penalty. The European Data Protection Board says a core service should not depend on consent for data it does not need. So Wi-Fi access should work whether or not the guest agrees to marketing.
  • Separate the two stepsAccess is one thing; joining your mailing list is another. Use a separate checkbox for marketing that is not ticked in advance. Silence, pre-ticked boxes or inactivity are not consent.
  • Make withdrawal as easy as signing upEvery marketing email needs a working unsubscribe link. Keep a record of when and how each person agreed.
  • In the US, CAN-SPAM sets the basicsThe FTC explains that commercial emails need truthful headers, honest subject lines, a valid postal address and a clear way to opt out, and opt-outs must be honored within 10 business days. It does not require prior consent, but state laws and other countries may set stricter rules.
  • Social login brings more data than you needA social login can pass you a name, photo and other profile details. Ask only for what you will use, and say in a short notice on the portal what you collect and why.
  • Some places expect you to know who is onlineIn 2016 the EU Court of Justice (McFadden, C-484/14) ruled that a business offering free Wi-Fi is not liable for damages for a user's copyright infringement, but a court can order it to protect the network with a password and ask users to identify themselves. Some countries go further: Russia has required identification of public Wi-Fi users since 2014. Ask a local adviser whether any logging or identification rule applies to you.
Coverage

Coverage, speed and the room at the end of the corridor

Plan by rooms, not by square footage. One router at reception rarely reaches every room. Most small hotels need several access points, often at least one per floor and more in long corridors, with each one connected by cable where possible. Ask an installer for a site survey, where they measure the signal room by room, before you buy anything.

Thick walls and old buildings block Wi-Fi. Stone, brick, concrete and metal-backed mirrors all eat signal. In a historic building you may need an access point in or near each room or wing. Mesh systems, where access points pass the signal to each other by radio, help where you cannot run cable, but each wireless hop can cost speed.

The Internet line is the ceiling. Wi-Fi cannot be faster than the connection coming into the building. Upload speed matters as much as download for video calls and large files, so check what your provider offers for both. In remote places, satellite or mobile may be the only option; say so honestly and set fair-use limits so one guest cannot slow everyone else.

Remote workers need stability more than peak speed. A call that drops every ten minutes is worse than a slower line that holds. Put an access point close to the desks, and if you want these guests, offer a cable port in the room or a quiet corner with a good table and sockets.

Plan for outages. Lines go down. Have a backup mobile router or second line, the router on a small battery backup, the provider's support number at the desk, and a short message ready for guests.

Guests

What guests expect from hotel Wi-Fi

This is our judgement from the hotel side. Your reviews are the real measure.

  • It works in the roomNot only in the lobby. A guest who has to sit on the stairs to send an email will say so in a review.
  • It is free and simpleOne step to join, no daily logins, no paid tier for basic speed. In a small hotel, charging for Wi-Fi tends to cost more goodwill than it earns.
  • It holds a video callBusiness travelers and remote workers will plan their stay around it. If it cannot, they need to know before booking.
  • Several devices per guestA phone, a laptop and a tablet, sometimes a streaming stick for the TV. Device limits per room should be generous.
  • Someone can fix itA guest should know who to ask when it stops working, at any hour.
Checklist

Guest Wi-Fi checklist, with a speed-test routine

Run this when you set up the network, and the speed test every month and after any change.

  • Separate networksGuest network apart from staff, PMS, cameras, locks and card terminals; client isolation turned on.
  • Current securityWPA3, or WPA2 and WPA3 together; default admin passwords changed; firmware updates assigned to someone.
  • Password planWho changes the guest password, how often, and where it is shown: key card, room guide, QR code in the room.
  • Portal and consentIf you use a login page: Wi-Fi works without marketing consent, a separate unticked box, a short privacy notice.
  • Speed test in every roomUse a phone and a laptop, at the desk and by the bed, in the evening when the hotel is busy. Note download, upload and whether a short video call holds. Keep the results in a simple sheet with the date.
  • Compare and fixAny room far below the others needs an access point moved or added. Re-test after the fix.
  • Outdoor and shared spacesTest the terrace, garden, breakfast room and any workspace guests use.
  • Outage planBackup connection, battery backup for the router, provider contact at the desk, a ready message for guests.
On the website

How to show Wi-Fi on your website and booking engine

"Free high-speed Wi-Fi" is on almost every hotel listing and tells guests nothing. Say what you tested, where it works and where it does not.

  • Give a tested speed, with a dateFor example: "Free Wi-Fi in all rooms. Tested in October in every room: at least [X] Mbps download and [Y] Mbps upload, enough for video calls." Fill in the lowest result from your own speed test, and update it when you re-test.
  • Say where it works"Wi-Fi covers all rooms, the lounge and the terrace. The garden cabins have a weaker signal; ask us for a room in the main house if you need to work." Honest limits prevent bad reviews.
  • Describe the workspace"Desk with a chair, lamp and sockets in every double room. Quiet corner in the library with a large table." Put it on room pages too. Our room description guide shows where it fits.
  • Be clear in remote places"We are connected by satellite. Wi-Fi is fine for messages, email and browsing, but video calls may drop in bad weather. Mobile coverage is weak in the valley." A guest who needs to work can then decide.
  • Match your booking site listingsUse the same facts on your booking engine, your Google listing and the OTAs, such as Booking.com and Expedia. Our guide to what to put on a hotel website lists the other practical facts guests check.
  • Keep the password off public pagesSend it with the key card, in the pre-arrival message or in a digital guest guide. A Wi-Fi QR code in the room lets most phones join with the camera. Our guide to boutique hotel technology covers digital guest guides.
Gonzalo Baeza
Can I help?

I'm Gonzalo. I ran hotels for more than five years, from small properties to remote lodges, and now I build websites for them. Can I help with your hotel or your website? Write to me at gonzalo@hotelcrafted.com. I answer myself, usually within one business day.

How it works

Four steps, from dated to done.

  1. Step 01

    Review

    Send us your website. We reply by email with what we'd change and a fixed price.

  2. Step 02

    Design

    A new look shaped around your property and its story. You approve it before we build.

  3. Step 03

    Build

    Fast, clean and connected to your booking engine. Simple for your team to update.

  4. Step 04

    Care

    We launch it with you, then stay close to keep it fresh.

FAQ

Questions hoteliers ask us.

Should hotel Wi-Fi have a password?+

In most cases, yes. A password with WPA2 or WPA3 encrypts the connection and keeps passers-by off the network. If you want an open network for a lobby or terrace, use equipment that supports Wi-Fi Enhanced Open and keep that network separate from everything else.

What is a hotel Wi-Fi captive portal?+

It is the login page guests see before the Internet works. It can ask for a room number and surname, an access code or an email address, and it can end access at check-out.

Can I require an email address to use the hotel Wi-Fi?+

Asking for contact details to give access is a different thing from consent to marketing. In the EU, consent to marketing must be freely given, so Wi-Fi should work whether or not the guest agrees to receive emails. Use a separate, unticked box, and check the rules where you operate.

Should the guest Wi-Fi be separate from the staff network?+

Yes. Keep guests on their own network, away from staff computers, the PMS, door locks and card terminals, and turn on client isolation. Ask your payment provider how separation affects your card security obligations.

How fast should hotel Wi-Fi be?+

There is no single number. It should hold a video call in every room at the busiest time of day, with good upload speed, not only download. Test it room by room in the evening and publish what you measured.

Can I put the Wi-Fi password on my hotel website?+

Not on a public page, where anyone nearby could find and use it. Share it with the key card, in the room, by QR code or in a guest guide sent after booking.

Keep reading

More on hotel websites.

Free review

Run a boutique hotel? Send us your site for a free review.

You'll get a short list by email within one business day. No calls, no pressure.

we read every email

Prefer email? Send your website link to gonzalo@hotelcrafted.com and I'll reply with 3 things I would change. I answer myself, within one business day. No calls, no newsletter.